AlignKeywordsSection#

Align *** Keywords *** section to columns.

Enabling the transformer

AlignKeywordsSection is not included in default transformers, that’s why you need to call it with --transform explicitly:

robotidy --transform AlignKeywordsSection src

Or configure enabled parameter:

robotidy --configure AlignKeywordsSection:enabled=True

Align keyword calls and settings into columns with predefined width. There are two possible alignment types (configurable via alignment_type):

  • fixed (default): pad the tokens to the fixed width of the column

  • auto: pad the tokens to the width of the longest token in the column

The width of the column sets limit to the maximum width of the column. Default width is 24 (see Widths for information how to configure it). With fixed alignment each column have fixed width (and tokens that does not fit go into overflow state - see Overflow).

auto alignment aligns tokens to the longest token in the column - the column width can be shorter than configured width (but no longer).

See examples of the alignment types:

*** Keywords ***
Keyword
    ${short}    Short Keyword    short arg
    ${other_val}    Short Keyword
    ...    arg
    ...    value

*** Keywords ***
Keyword
    ${short}                Short Keyword           short arg
    ${other_val}            Short Keyword
    ...                     arg
    ...                     value

*** Keywords ***
Keyword
    ${short}        Short Keyword       short arg
    ${other_val}    Short Keyword
    ...             arg
    ...             value

The auto alignment often leads to more compact code. But fixed setting offers more stability - adding new, slightly longer variable or keyword call will not change alignment of the other lines.

Widths#

The column width is configurable via widths parameter. The default value is 24. It’s possible to configure width of the several columns (using comma separated list of integers):

robotidy -c AlignKeywordsSection:widths=20

robotidy -c AlignKeywordsSection:widths=10,10,24,30

The last width will be used for the remaining columns. In the previous example we configured widths for 4 columns. The last width (30) will be used for 5th, 6th… and the following columns.

Use width 0 to disable column width limit. In auto alignment type it will always align whole column to the longest token (no matter how long the token is).

Overflow#

Tokens that do not fit in the column go into overflow state. There are several ways to deal with them (configurable via handle_too_long parameter):

  • overflow (default): align token to the next column

  • compact_overflow: try to fit the next token between current (overflowed) token and the next column

  • ignore_rest: ignore remaining tokens in the line

  • ignore_line: ignore whole line

See example (for fixed alignment type and default width 24):

*** Keywords ***
Keyword
    # keyword call Looo.. does not fit default column width (24)
    ${assign}    Looooooooonger Keyword Name    ${argument}    last
    Short    Short    Short    Short
    Single
    Multi    ${arg}
    ...    ${arg}

*** Keywords ***
Keyword
    # we are "overflowing" to the next column - taking 24 * 2 = 48 width
    ${assign}               Looooooooonger Keyword Name                     ${argument}             Short
    Short                   Short                   Short                   Short
    Single
    Multi                   ${arg}
    ...                     ${arg}

*** Keywords ***
Keyword
    # ${argument} is fit between columns, and next argument ("last") is aligned correctly
    ${assign}               Looooooooonger Keyword Name    ${argument}      last
    Short                   Short                   Short                   Short
    Single
    Multi                   ${arg}
    ...                     ${arg}

*** Keywords ***
Keyword
    # tokens after too long token are not aligned
    ${assign}               Looooooooonger Keyword Name    ${argument}    Short
    Short                   Short                   Short                   Short
    Single
    Multi                   ${arg}
    ...                     ${arg}

*** Keywords ***
Keyword
    # the wole line containing too long token is ignored
    ${assign}    Looooooooonger Keyword Name    ${argument}    Short
    Short                   Short                   Short                   Short
    Single
    Multi                   ${arg}
    ...                     ${arg}

Compact overflow#

Compact overflow tries to fit too long tokens between the alignment columns. This behaviour is controlled with compact_overflow_limit = 2 parameter. If more than configured limit columns are misaligned in a row, the overflow mode is used instead of compact_overflow. This behaviour helps in avoiding the situation, where compact_overflow misalign whole line if most of the tokens does not fit in the column.

Below example was run with config:

robotidy -c AlignKeywordsSection:enabled=True:handle_too_long=compact_overflow:widths=24,28,20 src.robot

*** Keywords ***
Keyword
    # compact overflow will be used as we only "misalign" two columns in a row
    LäVa_VastaanottotapahtumatTarkista    ${VASTAANOTTO}    ${TILAUS}    ${OSTOTILAUS}    ${LÄHETYS}    ${TILAUSPVM}

    # more than two columns are misaligned - using "overflow" instead
    LäVa_VastaanottotapahtumatTarkista    ${VASTAANOTTO_LONGER}    ${TILAUS_OCC}    ${OSTOTILAUS}    ${LÄHETYS}    ${TILAUSPVM}

*** Keywords ***
Keyword
    # compact overflow will be used as we only "misalign" two columns in a row
    LäVa_VastaanottotapahtumatTarkista    ${VASTAANOTTO}    ${TILAUS}       ${OSTOTILAUS}       ${LÄHETYS}          ${TILAUSPVM}

    # more than two columns are misaligned - using "overflow" instead
    LäVa_VastaanottotapahtumatTarkista    ${VASTAANOTTO_LONGER}             ${TILAUS_OCC}       ${OSTOTILAUS}       ${LÄHETYS}          ${TILAUSPVM}

Alignment of the indented blocks#

Indented blocks (FOR, IF, WHILE, TRY..EXCEPT..) are aligned independently.

*** Keywords ***
Keyword
    ${assign}    Keyword
    FOR  ${var}  IN  1  2  3
       ${variable}    Keyword    ${var}
       Another Keyword
       FOR  ${var2}  IN  1  2  3
           Short   1   2
           ${assign}    Longer Keyword
           ...    ${multiline}    ${arg}
       END
    END
   Keyword Call    ${value}  # aligned together with keyword call before FOR loop

*** Keywords ***
Keyword
    ${assign}               Keyword
    FOR    ${var}    IN    1    2    3
        ${variable}             Keyword                 ${var}
        Another Keyword
        FOR    ${var2}    IN    1    2    3
            Short                   1                       2
            ${assign}               Longer Keyword
            ...                     ${multiline}            ${arg}
        END
    END
    Keyword Call            ${value}  # aligned together with keyword call before FOR loop

Currently, inline IFs are ignored. Block headers (FOR ${var} IN @{LIST} or IF  $condition) are not aligned.

Split too long lines#

AlignKeywordsSection will split the lines if the lines after the alignment would exceed the limits set in the SplitTooLongLine transformer.

Note

Currently, only --configure SplitTooLongLine:split_on_every_arg=True mode is supported.

Using this configuration (SplitTooLongLine is enabled by default):

robotidy -c AlignKeywordsSection:enabled=True:widths=14,24 --line-length 80 src

will result in the following transformation:

*** Keywords ***
Keyword
    # fits now but it will not fit after the alignment
    Keyword    argument1    argument2    argument3    argument4

    # does not fit before the alignment
    Longer Keyword Name That Could Happen    argument value with sentence that goes over

    # fits, will not be split
    Keyword    argument

*** Keywords ***
Keyword
    # fits now but it will not fit after the alignment
    Keyword
    ...           argument1
    ...           argument2
    ...           argument3
    ...           argument4

    # does not fit before the alignment
    Longer Keyword Name That Could Happen
    ...           argument value with sentence that goes over

    # fits, will be aligned but not split
    Keyword       argument

Skip formatting#

It is possible to use the following arguments to skip formatting of the code:

It is highly recommended to use one of the skip options if you wish to use alignment but you have part of the code that looks better with manual alignment. It is also possible to use disablers (Disablers) but skip option makes it easier to skip all instances of given type of the code.